IP67 protection plays an important role in improving the reliability of waterproof connectors used in outdoor and industrial electrical systems. By preventing dust ingress and protecting against temporary water immersion, an IP67-rated connection helps reduce moisture-related electrical problems. At FaDa Technology, we focus on practical connector design, including reliable sealing structures, screw terminal connections, and cable compatibility. Our 2 Way Waterproof Screw Connector features a screw-locking connection, multiple pin configurations, and a rated current of up to 10A for 2-pin and 3-pin versions, making it suitable for outdoor lighting, automation, and other electrical applications.
When selecting electrical connectors for outdoor or industrial installations, I believe the IP rating should be one of the first specifications to check. A connector may have a durable housing and stable electrical contacts, but if dust or water enters through the connection interface, the entire electrical system can still experience problems.
IP67 is an ingress protection classification defined under IEC 60529. The two digits describe different levels of environmental protection:
For outdoor electrical connections, these two protection levels address different risks. Dust can accumulate around exposed terminals and sealing interfaces, while rainwater, splashing water, or temporary flooding can create a path for moisture to enter the connector.
However, IP67 should not be interpreted as a guarantee of permanent underwater operation or resistance to every high-pressure water jet. The actual protection depends on the connector design, mating condition, cable entry, and installation requirements.

From our experience in waterproof connector manufacturing, reliability is not determined by electrical performance alone. Environmental protection is equally important, especially when connectors are installed in locations that are difficult to inspect or maintain.
Dust and moisture are common environmental risks for outdoor electrical connections. When contaminants enter a connector, they may affect contact surfaces, insulation performance, and long-term electrical stability.
An IP67 protection design helps prevent these contaminants from entering the protected connection area under the specified conditions. For outdoor lighting systems and industrial equipment, this reduces the risk of environmental interference during normal operation.
Water entering an electrical connection can increase the risk of corrosion, insulation deterioration, and electrical faults. A properly sealed connector helps keep the contact area isolated from external moisture.
Our 2 Way Waterproof Screw Connector uses copper alloy contact pins with nickel plating. The contact resistance is specified at less than 5mΩ, while the insulation resistance is greater than 500MΩ. These electrical characteristics are important when evaluating connection stability alongside the connector's environmental protection.
Outdoor lighting, solar-related equipment, and automation systems may contain numerous cable connection points. If one connection fails because of moisture ingress, maintenance personnel may need to inspect wiring, replace components, or temporarily interrupt system operation.
Using an appropriately rated waterproof connector helps reduce this exposure risk. In our view, the most practical benefit is not simply the IP67 label, but the additional protection it provides when combined with correct cable selection and installation.
An IP rating is achieved through the complete connector structure rather than a single component. Housing dimensions, sealing materials, cable diameter, and connection interfaces all influence the final protection performance.
One practical feature of our 2 Way Waterproof Screw Connector is its screw termination method. Wires are secured through screw terminals, so field assembly does not require welding or soldering.
This connection method is useful for installation projects where wiring needs to be completed directly on site. It also makes the connector suitable for different cable-to-cable connection requirements, provided the wire specifications match the product requirements.
The connector uses high-performance engineering plastics for its housing and insulated parts, copper alloy with nickel plating for the contact pins, and silicone for the sealing component.
Each material has a specific role. The housing provides structural support and electrical insulation, the plated contacts provide the conductive interface, and the silicone seal helps prevent water from entering through the relevant sealing areas.
Although the product is named a 2 Way Waterproof Screw Connector, the PG12 series also offers 2-pin, 3-pin, 4-pin, and 5-pin configurations. This allows the connection arrangement to be selected according to the electrical circuit and installation requirements.
When evaluating a waterproof connector for a project, we recommend checking the electrical ratings and cable compatibility together with the IP protection level. The following table summarizes the main specifications of our PG12 connector series.
| Specification | Details |
|---|---|
| Product Name | 2 Way Waterproof Screw Connector |
| Model | PG12 |
| Connection Method | Screw thread locking / screw termination |
| Available Pin Configurations | 2-pin, 3-pin, 4-pin, 5-pin |
| Waterproof Rating | IP67 |
| Color | Black |
| Cable Specification | 14AWG–20AWG |
| Cable Diameter Range | 6.0–12.5 mm |
| Rated Current | 10A for 2-pin and 3-pin; 8A for 4-pin; 6A for 5-pin |
| Operating Voltage | 300V AC (rms) |
| Withstand Voltage | 1500V AC for 1 minute |
| Contact Resistance | <5mΩ |
| Insulation Resistance | >500MΩ |
| Mating Durability | ≥3,000 mating and unmating cycles |
| Operating Temperature | -40°C to +105°C |
| Flame Resistance | UL94-V0 |
| Housing and Insulated Parts | High-performance engineering plastics |
| Contact Material | Nickel-plated copper alloy |
| Sealing Material | Silicone |
One specification worth paying attention to is the rated current. The 2-pin and 3-pin versions support 10A, while the 4-pin and 5-pin versions have lower rated currents of 8A and 6A respectively. Therefore, pin count should not be selected based on wiring convenience alone. The actual load current and circuit configuration must also be considered.
IP67 waterproof connectors are suitable for many electrical applications where dust and temporary water exposure are expected. At FaDa Technology, our waterproof connector product range is developed for outdoor lighting, automation, new energy, solar photovoltaic equipment, machinery, and communication-related applications.
Outdoor lighting installations often expose cable connections to rain, humidity, dust, and changing temperatures. A waterproof screw connector provides a practical cable connection solution for lighting circuits, landscape lighting, and other outdoor electrical equipment.
Solar installations operate outdoors for extended periods. Cable connections around photovoltaic modules and related equipment must account for weather exposure, temperature variation, and maintenance accessibility.
For these applications, connector selection should consider rated current, voltage, cable compatibility, and the complete system's environmental requirements. An IP67 rating alone does not establish compatibility with every photovoltaic system.
Automation equipment frequently uses electrical connections for sensors, control units, actuators, and other components. In dusty or humid working environments, appropriately sealed connectors help protect electrical interfaces from external contamination.
The screw termination design is also useful when technicians need to assemble or service wiring in the field without relying on soldering equipment.
Outdoor communication devices and certain transportation-related electrical systems may require compact cable connections with environmental protection. The appropriate connector must be selected according to the actual operating environment, electrical load, vibration exposure, and applicable industry requirements.
Even a well-designed waterproof connector can lose its protection performance if it is installed incorrectly. Based on the structure and specifications of our screw terminal connector, we recommend checking the following points before putting the assembly into operation.
We also recommend avoiding the assumption that an IP67-rated connector can be used in every wet environment. Applications involving continuous underwater operation, high-pressure cleaning, or corrosive liquids may require a different protection specification and additional verification.
Established in 2009, ShenZhen 2 IN 1 Technology Co., Ltd. focuses on the research, development, production, and sales of waterproof connectors. Under the FaDa Technology name, we serve applications in outdoor lighting, industrial automation, new energy, solar photovoltaic modules and inverters, machinery, 5G communication, and environmentally friendly transportation.
Our product range includes multiple waterproof connector series covering different connection structures and application requirements. We also provide OEM and ODM services for connectors and wires, supporting customers who need product configurations adapted to specific equipment or installation designs.
For the 2 Way Waterproof Screw Connector, we focus on practical selection factors such as pin configuration, rated current, cable diameter, connection method, and sealing structure. These details help determine whether a connector is suitable for the intended electrical system rather than relying on the waterproof rating alone.
To learn more about our waterproof connector solutions, visit FaDa Technology or explore the relevant product specifications with our technical team.
IP67 means the connector enclosure is dust-tight and protected against temporary water immersion under specified test conditions. The IPX7 classification generally involves immersion at a depth of up to 1 meter for 30 minutes. It does not automatically mean the connector is suitable for permanent underwater use.
Yes. An appropriately selected IP67 connector can be used in outdoor lighting systems exposed to rain, dust, and temporary water immersion. The cable size, current rating, voltage, and installation conditions must also match the lighting system requirements.
The PG12 series supports 10A for 2-pin and 3-pin configurations, 8A for 4-pin configurations, and 6A for 5-pin configurations. The correct version should be selected according to the actual electrical load.
No. The screw termination design allows wires to be secured mechanically without welding or soldering. This makes field assembly more convenient, provided that the conductors are correctly prepared and the terminals are properly tightened.
The specified cable range is 14AWG–20AWG, with an outer cable diameter of 6.0–12.5 mm. Both the conductor specification and cable outer diameter should be checked before installation.
Not necessarily. IP67 covers temporary immersion under specified test conditions, not continuous underwater operation. For permanent submersion, an appropriately specified IP68 solution should be evaluated.
The PG12 connector uses high-performance engineering plastics for its housing and insulated parts, nickel-plated copper alloy contact pins, and silicone sealing components.
We recommend checking the manufacturer's product range, technical specifications, production capabilities, sealing design, and OEM/ODM support. It is also important to confirm whether the stated IP rating applies to the complete assembled connector under the intended installation conditions.
IP67 protection improves waterproof connector reliability by limiting dust ingress and protecting against temporary water immersion. However, long-term connection performance also depends on the quality of the sealing structure, electrical contacts, cable compatibility, and installation process.
At FaDa Technology, we combine waterproof connector manufacturing experience with practical product configurations to serve outdoor lighting, automation, solar photovoltaic, and industrial equipment applications. Our 2 Way Waterproof Screw Connector offers multiple pin options, screw termination without welding, and defined electrical and cable specifications for different wiring requirements.
When choosing a waterproof connector, we recommend evaluating the complete operating environment rather than looking at the IP rating in isolation.